In order to get more useful information for our clients, we try to collect and provide some information about LED Car light information and ways of different lamp installation and replacement.

Step 1

Park your car on a level surface with the front facing toward a wall or garage door.

Step 2

Find the adjustment screws. The screws are located on different places on different models, but they are frequently on the side and on the bottom of the headlamps. On many models, there will be smaller screws that hold the headlight into the assembly, and 2 larger screws for horizontal and vertical adjustments. Some cars may only have one screw for both the vertical and horizontal adjustment.

Step 3

Turn the headlights on.

Step 4

Make note of the light they cast on the wall or garage door. They should be facing evenly straight ahead.

Step 5

Loosen or tighten the adjustment screws slightly with a screwdriver to lower or raise the beam.

Step 6

Repeat with the other headlight .

Step 7

Turn the high beams on and repeat if your car has a 4-headlight system (2 high beams and 2 low beams light ).

Things You'll Need:

· Car Manuals

· Screwdriver Sets

Tips & Warnings

· Your headlights may not be adjustable. Check your owner's manual for more information.

· Some newer cars have a small level within the headlamp assembly, making it easier to get an accurate adjustment.