Now let us share a new style car,it is cars 77.Of course,I refer this kind of car mainly because the lights for the car is really attractive.It will on sale in December,2011.It is designed based on customer's need.This kind of car can serve the maximum qualty that you need for your car and safety that you cannot deny the effectiveness.Of course,the most classic part for this style is the tail light, it makes the car stands out in the crowd cars,but never reduced the originality of the car itself.Now let's see the ways how we can install the led tail lights as flows.

Equipment:
 1.Screw driver
 2.A small cutter or a very sharp knife
 3.Silicone adhesive
 4.Led tail lights with wiring
 5.A drill

start the installation by following the below steps:
 1.Make sure to open the screws cover and start loosen all the involved screws.
 2.Take out the whole tail lights body
 3.Cut the red tail lights cover and drill a small hole at the back of tail lights
 4.Put the wired led tail lights on and make sure to fit it at the right position
 5.Put back the red lights cover using the silicone adhesive .
 6.Leave the tail lights for a few minutes to ensure the silicone adhesive dry
 7.Screw it back to their place

More reading:
1.car led tail light-Mini baoma tail light
2.How to replece LED tail lights
3.What are led car taillights