LED car light is rather important for car,usually we can see the car lights are the eyes of the car.Only when there is enough brightness and correct beam angle,can we have a safe and comfortable driving.Therefore,it is very important for us to make sure the enough brightness and correct beam angle,and now we discuss how we can do it well.

At first,we should check all the light of the whole car,including headlamps, led turning light, led back up light,width-indicator lights, led brake lights and other led light bulbs.When check the light,we have better turn on all the light.When find the bad phenomenon,it may be the lights have been burned off or the blown fuses are broken, we should change the bad lights or change the blown fuses.

Secondly,examine and adjust the headlight beam.In order to ensure the safety of driving at night, we should check regularly to adjust headlamp beam to conform to the requirements of the State.

Thirdly,the method how to adjust the headlamp beam:use the tester to adjust headlight light.Normally the tire pressure is empty.When the headlamp is off, first to see the sockets and wiring in poor condition caused by or fuse blown.If it is determined damaged headlight bulb, first remove the headlight of the decorative cover, remove the headlight retaining screws prevent demolition if there are other accessories should be removed.Remove the headlamp wick, carefully unplug the cord and plug, and then press and remove the reverse order, the new wick-loading complex.After re-installed do not forget to adjust the headlamp illumination angle.b) replacement headlamp halogen bulb.Models commonly used in recent years the headlamp halogen bulbs, halogen bulbs burn out when the time, remove the headlight wires and plugs, remove the dust cover, rubber holder, and burned-out halogen bulbs.Then remove the car led bulbs in reverse order of loading complex.

More reading:
1.LED Auto Light Bulbs
2.The feature of the led car bulbs
3.How to improve your led cars with led?